The Roof Replacement Process

All roofs have an expiration date, and roof replacement is a necessary process that every homeowner should be aware of. When the day comes to replace your roof, you need to know the correct steps to get the job done, even if you’ll be hiring local roofing services.

Here are the basic steps of the roof replacement process:

Prepare Your Home For Roof Replacement

You need to prepare the inside and outside of your home before calling the local roofing services to begin replacing your roof. Cover everything in the attic with an attic tarp and remove any valuable items so you’re not worried about possible damage.

Next, move anything that’s outside close to your home that might be damaged by falling debris. This can include potted plants, patio furniture, or grills. You should also remove any antennas, solar panels, and satellite dishes from your roof or vicinity.

Removing The Old Roofing

After you’ve prepared your home, roofers will begin by removing your old roof material for a thorough inspection of the decking. All existing shingles are removed and deposited in a dumpster.

Underlayment or felt paper and old or damaged flashing and drip edging are also removed at this point. An excellent local roofing services crew will ensure they protect your property before they begin the job using tarp and protection plywood.

Minor Repairs

Any soft, rotted, or wet wood discovered on the decking is replaced to ensure a solid base for your roofing structure. The sheathing is inspected to ensure its correctly attached to your roof. Once the decking is prepared, a drip edge is installed on the roof edges.

Installing Underlayment

This begins with installing ice and water shields to prevent any water from getting under the shingles and penetrating the sheathing, where severe damage can result from moisture. This needs to be done at all roof penetrations, including the chimney, pipe flanges, and roof connections.

After the shield is applied, your roof is covered using roofing felt. The felt cover acts as a barrier that keeps any moisture away from your decking material. Your local roofing services contractor may use heavy-duty roofing felt if you have a steep roof. Synthetic underlayments are usually used in metal roofing.

Installing Roofing Material

Once the above steps are completed, the roofers will start laying out the new shingles or other materials. Whether you’re replacing asphalt shingles, metal roofing, tiles, or flat roofing, the local roofing services crew should follow the manufacturer’s specifications.

This ensures they adhere to industry best practices and avoid voiding your warranty. Ridge vents, ridge capping, and counter-flashing will also be installed if necessary. Flashing can also be done as the shingles are installed, progressing with the rows of shingles up the roof.

Cleanup And Inspection

The job site should be cleaned up every day if the installation takes a couple of days. On the final day, a final cleanup should be done, and the debris hauled away. The building inspector or project manager should then meticulously inspect the new roof installation. You should also check to ensure your roof is installed correctly and you’re satisfied with the work.

If you are in need of Marietta roofers, give Stable Roofs a call, and we will provide you with a free roof inspection as well as a free estimate as part of our roofing services. If you’re unsure whether you should go for a partial or complete roof replacement, check out a comparison between total and partial roof replacement in our next article.